The AD14 is designed for simultaneous pH, ORP and Temperature measurements. The large 2 row display (LCD) also has graphic symbols to guide you through
the operations. Calibration is performed automatically in 1 or 2 points.

4 ring stainless steel conductivity/TDS probe with 1 meter cable

Replaceable pH/ORP/Temp electrode for the AD14 pocket tester.

Electrode holder for bench meters - is NOT INCLUDED with the AD3000 and AD8000 bench meters!

Stainless steel temperature probe with 1 meter cable. Supplied with bench and portable meters

TDS probe with 2 m cable for ECO407 - without connector !

Conductivity probe with 2 m cable for ECO406

Refillable glass pH electrode with double junction, 1 m cable and BNC connector

1,500 ppm calibration solution 25 pcs x 20ml sachets

1,382 ppm calibration solution 25 pcs x 20ml sachets

1,413μS/cm calibration solution 25 pcs x 20ml sachets

12.88 mS/CM buffer solution 25 pcs x 20ml sachets

pH 10.01 Buffer Solution 25 x 20ml Sachets

pH 7.01 Buffer Solution 25 x 20ml Sachets

pH 4.01 buffer solution 25 x 20ml Sachets

Electrode rinse solution 25 pcs x 20ml sachets

Rinse your electrode with this solution between each measuring.
Removes contamination from the electrode providing you precise results.

The AD12 is a the most advanced microprocessor based Waterproof pH/Temp pocket testers in the market. This fast, stable and precise pocket tester is for users who require the greatest accuracy. The modular design allows replacing the electrode in a fast and simple way. Features such as stability indicator, automatic calibration, and automatic temperature compensation make this waterproof pocket tester a must-have in a variety of industries.

The AD35 is a waterproof Conductivity tester, that also measure and display temperature. The housing has been completely sealed against humidity. All Conductivity readings are automatically temperature compensated and temperature values can be displayed in °C or °F units. Conductivity calibration is automatic at one point, while temperature is factory calibrated and the user can perform an adjustment only. To prolong battery life, these models are provided with an auto-off feature that turns them off after 5 minutes of non-use. Moreover, when batteries become too weak to ensure reliable readings the meter automatically turns off.

The AD33 is a waterproof Conductivity tester, that also measure and display temperature. The housing has been completely sealed against humidity. All Conductivity readings are automatically temperature compensated and temperature values can be displayed in °C or °F units. Conductivity calibration is automatic at one point, while temperature is factory calibrated and the user can perform an adjustment only. To prolong battery life, these models are provided with an auto-off feature that turns them off after 5 minutes of non-use. Moreover, when batteries become too weak to ensure reliable readings the meter automatically turns off.

The AD32 is a waterproof Conductivity, TDS and temperature tester. The housing has been completely sealed against humidity. All Conductivity and TDS readings are automatically temperature compensated (ATC) and temperature values can be displayed in °C or °F units. The Conductivity/TDS conversion factor (CONV) can be selected by the user, as well as the coefficient ß (BETA) for temperature compensation. The instruments can be calibrated at one point. Measurements are highly accurate with a unique stability indicator right on the LCD. The models are also provided with a low battery symbol which warns the user to replace the batteries.

The AD31 is a waterproof Conductivity, TDS and temperature tester. The housing has been completely sealed against humidity. All Conductivity and TDS readings are automatically temperature compensated (ATC) and temperature values can be displayed in °C or °F units. The Conductivity/TDS conversion factor (CONV) can be selected by the user, as well as the coefficient ß (BETA) for temperature compensation. The instruments can be calibrated at one point. Measurements are highly accurate with a unique stability indicator right on the LCD. The models are also provided with a low battery symbol which warns the user to replace the batteries.

The AD11 is a the most advanced microprocessor based Waterproof pH/Temp pocket testers in the market. This fast, stable and precise pocket tester is for users who require the greatest accuracy. The modular design allows replacing the electrode in a fast and simple way. Features such as stability indicator, automatic calibration, and automatic temperature compensation make this waterproof pocket tester a must-have in a variety of industries.

Microprocessor based pH tester to assure to produce fast and stable readings.
They come with features such as automatic temperature compensation, low battery indication, automatic shut-off after 8 minutes and others. They are also incorporated with easy push buttons for automatic calibration and splashproof keypad that prevents water infiltration.

Plastic pH electrode with double junction, 2m cable and BNC connector